Multicasters,
We're trying to get PIM SM running to support enterprise-wide
conferencing, using a static rendezvous point. According to the
documentation, we shouldn't have to configure the ip pim rp-addr command
on the RP:
http://www.cisco.com/warp/public/105/48.html
"The RP discovers that it is the RP because all the other routers are
pointing to it as their RP and are subsequently sending registers to it.
"
However, we get the following error message on the RP (10.108.1.1):
00:23:26: %PIM-6-INVALID_RP_JOIN: Received (*, 239.255.80.75) Join from
10.108.1.2 for invalid RP 10.108.1.1
When we insert "ip pim rp-addr 10.108.1.1" on the RP, then the error
messages stop. Is the documenatation simply mistaken, or more likely,
are we forgetting to do something simple?
We may later configure a mapping agent with Auto-RP but for now we want
the manual control.
-- TIA, TT
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:06 EDT