Hi,
I have set up a 3 router network with all used interfaces as
Ethernet.
Each router has 3 used interfaces. I have assigned the ip addresses
and also configured ospf on the interfaces. There is one area 0 and
one area 1.
But it seems ospf information is not getting distributed. On doing
show ip route, no ospf route is shown.
The routers are RP-7000.
Am I missing anything ?
-dhiman
10.0.3.200/24(area1)
\ 10.3.1.1/24(area 1) / (10.0.1.200) area 1
R2-----------------------------R0
| 10.1.3.1/24(area 1) |
10.3.2.1/24(area 0) |10.1.2.1/24(area 1)
| |
| |
10.2.3.1/24(area0)_________R1_(10.2.1.1/24)(area 1)
|
|
(10.0.2.200)(area 0)
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:08 EDT