Hi!
I'm having an odd problem on a new T3 link I'm
configuring.Using a PA-T3 and PA-2T3 on a VIP4-80.
I have two working DS3's currently configured like:
interface Serial5/1/1
description DS3 test
bandwidth 44210
ip address x.x.x.x 255.255.255.252
no ip directed-broadcast
ip route-cache distributed
dsu bandwidth 44210
framing m13
cablelength 450
no cdp enable
note that the two working ones, hardware loopback
(patching the transmit and receive coax, no dsu)
there’s no problem. Serial is up/up (looped).
on the new ports, serial is down/down with loopback
and only is up/up (looped) if I change config to this
one putting a "clock source internal" instead of the
default line.
interface Serial5/1/1
description DS3 test
bandwidth 44210
ip address x.x.x.x 255.255.255.252
no ip directed-broadcast
ip route-cache distributed
dsu bandwidth 44210
framing m13
cablelength 450
clock source internal
no cdp enable
this thing might be new to 12.0(21)S1 since this
wasn't the way it was two weeks ago when we upgraded
our 7507 from 12.0(15)S1. Note that the cables are
tested ok and same cable run as the two working DS3s.
I've already opened a TAC case for this but maybe
there's someone here who can provide a quick answer.
thanks in advance.
tito
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - live college hoops coverage
http://sports.yahoo.com/
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:08 EDT