Hi,
On Sun, Mar 17, 2002 at 05:02:45PM -0800, Tito Basa wrote:
> note that the two working ones, hardware loopback
> (patching the transmit and receive coax, no dsu)
> there’s no problem. Serial is up/up (looped).
>
> on the new ports, serial is down/down with loopback
> and only is up/up (looped) if I change config to this
> one putting a "clock source internal" instead of the
> default line.
Sounds not completely unlikely to me - if the line is hardware looped,
there is no clock source unless you set "clock source internal".
Due to crosstalk or whatnot, it is possible that the other T3s get "some
sort of signal" from somewhere, amplify it (because clock is looped back),
and work without any reference clock, but that's just by chance.
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany gert@greenie.muc.de
fax: +49-89-35655025 gert.doering@physik.tu-muenchen.de
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:08 EDT