There's nothing like Juniper's no-cspf.
There is a way that is hidden/undocumented/unsupported. Unless IOS
has changed since last I looked, you have to define an explicit path,
then append "verbatim" to the path-option statement...
R1(config-if)#tunnel mpls traffic-eng path-option 1 explicit name foo verbatim
The explicit-path can be as short as just one node (the directly-
connected next-hop). The next node (either cisco and juniper) will
strip out the PATH's ERO and send it on towards egress according to the
RIB, so from that point on it's like no-cspf.
Sean
>I just noticed that in cisco you can not establish LSP
>without enabling OSPF
>opaque LSA, this is quite different from Juniper.
>JUNOS allows you to set up
>LSP just based on normal IGP information. Am I missing
>some commands in IOS?
>Does IOS have a way to enable MPLS-TE without having
>OSPF opaque LSA?
>
>Thanks
>LU
>
>__________________________________________________
>Do You Yahoo!?
>Yahoo! Tax Center - online filing with TurboTax
>http://taxes.yahoo.com/
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:11 EDT