[nsp] PA-A3 on 7206

From: Ming (mingf@HK.Super.NET)
Date: Fri Aug 28 1998 - 06:10:25 EDT

Next message: Christian Kratzer: "RE: [nsp] PA-A3 on 7206"
Previous message: Martin Bachofner: "Re: [nsp] show tec by snmp/tftp"
Next in thread: Christian Kratzer: "RE: [nsp] PA-A3 on 7206"
Maybe reply: Christian Kratzer: "RE: [nsp] PA-A3 on 7206"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

I have a PA-A3 which is need to be installed on a cisco7206. The IOS
version is 11.2(11). I found that the router could not recognize the PA-A3
card, which caused a insertion failure message. From documentation, it is
said to be supported on IOS 11.1.19 or later.

I have tried to insert the card into another 7206 running 11.1(19)CC1, and
the router could detect the card withour any problem.

I would like to ask which IOS code do I need to run in order to
support PA-A3 on 7206? If I need to run IOS 11.2, what can I do?

Regards,

Ming

Next message: Christian Kratzer: "RE: [nsp] PA-A3 on 7206"
Previous message: Martin Bachofner: "Re: [nsp] show tec by snmp/tftp"
Next in thread: Christian Kratzer: "RE: [nsp] PA-A3 on 7206"
Maybe reply: Christian Kratzer: "RE: [nsp] PA-A3 on 7206"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:13 EDT