Him
you require a 11.2 P relase for the 7206 to support nearly
any port adapter.
The most current would be 11.2(15)P. Make sure you have the 'P'
Greetings
Christian Kratzer
Toplink
-- TopLink Internet Services GmbH info@toplink.net Christian Kratzer http://www.toplink.net/ Phone: +49 7032 2701-0 Fax: +49 7032 2701-19 FreeBSD spoken here!> -----Original Message----- > From: Ming [mailto:mingf@HK.Super.NET] > Sent: Freitag, 28. August 1998 12:10 > To: cisco-nsp@iagnet.net > Subject: [nsp] PA-A3 on 7206 > > > > Hi, > > I have a PA-A3 which is need to be installed on a cisco7206. The IOS > version is 11.2(11). I found that the router could not > recognize the PA-A3 > card, which caused a insertion failure message. From > documentation, it is > said to be supported on IOS 11.1.19 or later. > > I have tried to insert the card into another 7206 running > 11.1(19)CC1, and > the router could detect the card withour any problem. > > I would like to ask which IOS code do I need to run in order to > support PA-A3 on 7206? If I need to run IOS 11.2, what can I do? > > Regards, > > Ming >
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:13 EDT