Right from the CD:
Explanation : The data transfer rate is exceeding the limitations of the
router.
Recommended Action: Reduce or eliminate access lists, reduce the number
of users on the Ethernet segment, or fast switch (use a route cache to
expedite packet switching). If this situation appears to be more than
bursty, it may indicate that your system is handling peak traffic. You
may consider upgrading to a higher platform, such as the Cisco C4500. If
the error persists, call your technical support representative.
At 07:20 PM 1/16/98 +0800, you wrote:
>Folks
>
>Does anyone know what the following error messages that appear from
>our cisco routers mean ?
>
>This is a spurious message that seems to have transitioned our
>serial connection.
>
>
>Jan 12 08:06:13 net-gw 175: %LANCE-3-UNDERFLO: Unit 0, underflow error
>Jan 13 19:12:49 net-gw 178: %LANCE-3-UNDERFLO: Unit 0, underflow error
>Jan 14 07:37:08 net-gw 180: %LINK-3-UPDOWN: Interface Serial0, changed state
>to down
>Jan 14 07:37:12 net-gw 181: %LINK-3-UPDOWN: Interface Serial0, changed state
>to up
>
>Appreciate any advise you may have.
>
>Best Regards
>
>-rc
>
>
----------------------------------------------------------------------
Terry Martin
Senior Tech Support Specialist
ADC Kentrox
E-Mail: terry_martin@kentrox.com
Phone 1-800-733-5511 option 3
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:14 EDT