Re: [nsp] 7206+pa2t3+pa-f-mm+pa-2h

From: Dorian R. Kim (dorian@blackrose.org)
Date: Wed Jan 21 1998 - 11:04:39 EST


On Thu, Jan 22, 1998 at 02:30:20AM +1100, andrew khoo wrote:
> how will a 7206 handle load on the following config:
>
> 0: c-i/o-fe-mii
> 1: pa-2t3
> 2: pa-2h
> 3: pa-4t (pushing 2 x 8Mbps half-duplex outbound)

You shouldn't try to put more than 3 DS3s worth of traffic (roughly)
on a 7200. The limiting factor is the PCI bus. 7200s have 3 bridged
PCI bus.

-dorian



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:14 EDT