how will a 7206 handle load on the following config:
0: c-i/o-fe-mii
1: pa-2t3
2: pa-2h
3: pa-4t (pushing 2 x 8Mbps half-duplex outbound)
what about this config?
0: c-i/o/-fe-mii
1: pa-2t3
2: pa-f-mm
3: pa-4t (about a T1s worth of traffic)
5+6: pa-a2-4t1c-t3atm
both with npe-200 128Mb.
also, has anyone actually used the pa-a2-4t1c-t3atm yet with pacbellatm?
==============================================================
andrew khoo - rebel leader aus: +61-2-9223-2777
Ourworld Global Network, Australia usa: +1-415-902-8820
--------------------------------------------------------------
get on the OGN backbone with 64K ISDN @ $500/month & no setup!
==============================================================
-- We Bite (tm) --
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:14 EDT