Hopefully someone here can help this out....
I am setting up a CISCO 2509 for call in users......
It will allow call-in on analog modems...
However, when the caller tries to get authenticated through radius all
the debug screen on Radius shows is a user name of an apostrophe ( ' )
not the actual user name being sent.
aaa new-model
aaa authentication local-override
aaa authentication login default radius
aaa authentication ppp default radius local
aaa authorization exec radius local
aaa authorization network radius local
aaa accounting exec start-stop radius
aaa accounting network start-stop radius
!
!
line 1 8
autoselect during-login
autoselect ppp
script startup default
script reset default
modem InOut
speed 115200
I have later the ip and secret for the radius server put in the config.
ANY IDEAS WOULD BE GREATLY HELPFULL....
Randy
rts@rdr.net
RTS
rts@rdr.net
Director of Operations
Always Looking For A Better Way
Oh Yea...Found a better way....
RaDaR Computer Solutions (rdr.net)
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:15 EDT