Help, please!
I'm having trouble getting a 3640 with 4 Channelized T1/PRI ports to
talk to a 2501/csu or a Ascend Pipeline P130 on the other end.
Strangely, if I do 'cont t1 2/0; loop local', the other end comes
up with line proto up/looped.
If the other end loops their csu at the network side, our end comes
up but looped.
No errors on a 'sho cont t1 2/0'.
But the two ends can't talk to each other.
Any suggestions?
Thanks,
Avi
-----------------------------
!
controller T1 2/0
framing esf
linecode b8zs
channel-group 0 timeslots 1-24
description t1 to syssrc
!
interface Serial2/0:0
ip address 207.106.127.69 255.255.255.252
!
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:16 EDT