> Have an NT box going on our network, wish to throttle the FastEthernet
> port that it is on to 1mb max. Have set "bandwidth 1000" in the
> interface config... can I assume that is sufficient to allow it a
> maximum of 1mb bi-directional bandwidth?
As has already been mentioned, 'bandwidth NUM' isn't going to help you.
Your best hope is to force the port to 10-hdx, though it might be worth
considering why it is you want to choke this machine off so heavily and if
there's an router or featureful L2 device somewhere between it and
whatever resource you're concerned about.
..kg..
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:19 EDT