RE: [nsp] Cisco express forwarding

From: Kinczli Zoltán (Zoltan.Kinczli@Synergon.hu)
Date: Wed Oct 17 2001 - 17:44:33 EDT

Next message: John Welder: "Re: [nsp] VIP4 memory"
Previous message: Wortendyke, Ken: "[nsp] VoIP on ATM"
Maybe in reply to: francisv@dagupan.com: "[nsp] Cisco express forwarding"
Next in thread: francisv@dagupan.com: "RE: [nsp] Cisco express forwarding"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hello,

It indicates you have a feature configured on that
i/f, sub-i/f, which is not supported by CEF.

regards,
--Z.

-----Original Message-----
From: francisv@dagupan.com
Sent: Wed 10/17/2001 2:33 PM
To: cisco-nsp@puck.nether.net
Cc:
Subject: [nsp] Cisco express forwarding

Hi,

I've enabled CEF on the 7206 router but upon inspecting the interfaces
(show
cef interfaces), one serial interface had this:

Serial1/3 is up (if_number 8)
  Corresponding hwidb fast_if_number 16
  Corresponding hwidb firstsw->if_number 8
  Internet Protocol processing disabled
  Packets switched to this interface are dropped to the next slow path

This serial is the interface for the frame-relay connection. The
sub-interfaces also has "Packets switched to this interface are dropped
to
the next slow path". What does this mean?

---
 francis vidal [bitstop network services]
 streaming media + web services
 v(02)330-2871,(02)330-2872

application/ms-tnef attachment: winmail.dat

Next message: John Welder: "Re: [nsp] VIP4 memory"
Previous message: Wortendyke, Ken: "[nsp] VoIP on ATM"
Maybe in reply to: francisv@dagupan.com: "[nsp] Cisco express forwarding"
Next in thread: francisv@dagupan.com: "RE: [nsp] Cisco express forwarding"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:20 EDT