Micky,
Try "sh ver" on the 12012, see if you got the 3-GE card show up first. You
might need to do a "upgrade all slot xx".
Joe Hsieh
-----Original Message-----
From: micky [mailto:micky@apol.com.tw]
Sent: Sunday, October 28, 2001 8:13 PM
To: Alex Yeung
Cc: cisco-nsp@puck.nether.net; boris@apol.com.tw; Desmarais, Jonathan
Subject: Re: [nsp] Cisco GSR12012 support 3port GE line card ?
Hi Alex Yeung
I have tried different slot on GSR 12012,but still didn't work
But I inserted into GSR model 12016 and it worked,that's very tricky
and ridiculous
The two GSRs(12012 and 12016) are running the same IOS version
Could you give me more tips or clues ?
Special thanks
Micky
----- Original Message -----
From: "Alex Yeung" <alyeung@cisco.com>
To: "micky" <micky@apol.com.tw>; "Desmarais, Jonathan"
<JDesmarais@colt-telecom.com>
Cc: <cisco-nsp@puck.nether.net>; <boris@apol.com.tw>
Sent: Monday, October 29, 2001 8:23 AM
Subject: RE: [nsp] Cisco GSR12012 support 3port GE line card ?
> >
> > Hi Jon
> >
> > It's strange
> > I have used the version on GSR 12016 for a long time,that's
fine,no
> > any problem
> > What's difference between 12012 and 12016 ?
>
> 12012 is a 12-slot GSR, 12016 is a 16-slot GSR.
>
> >
> >
> >
> > > You need 12.015S2 at least.
>
> 3xport GE is supported from 12.0(11)S3.
>
> > >
> > > I have the same issue, try using 12.016S(thelatest) it works well.
> > >
>
> The latest is 12.0(19)S for the GSR.
>
> Alex Yeung
>
>
> > > Cheers
> > > Jon
> > >
> > > -----Original Message-----
> > > From: micky [mailto:micky@apol.com.tw]
> > > Sent: 26 October 2001 11:24
> > > To: cisco-nsp@puck.nether.net
> > > Subject: [nsp] Cisco GSR12012 support 3port GE line card ?
> > >
> > >
> > > Hi Mr.nsp
> > >
> > > My GSR12012 is running IOS ver 12.0.15s1
> > > When I finished inserting the line card,I found card was detected
by
> > IOS
> > > But the front panel led showed "up" ,not "run"
> > > It's very strange,this caused GE port to be down
> > >
> > > Anyone about this condition ?
> > >
> > > Thanks
> > > Have a nice weekend
> > > Micky
> > >
> > >
> > >
> > >
> > >
> > >
> > > **********************************************************************
> > > COLT Telecommunications
> > > Registered in England No. 2452736
> > > Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
> > > Tel. 020 7390 3900
> > >
> > > This message is subject to and does not create or vary any contractual
> > > relationship between COLT Telecommunications, its subsidiaries or
> > > affiliates ("COLT") and you. Internet communications are not secure
> > > and therefore COLT does not accept legal responsibility for the
> > > contents of this message. Any view or opinions expressed are those of
> > > the author. The message is intended for the addressee only and its
> > > contents and any attached files are strictly confidential. If you have
> > > received it in error, please telephone the number above. Thank you.
> > >
> > >
> > > **********************************************************************
> >
> >
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:21 EDT