GEIP+ also uses a unique double-wide GigE port adapter, instead of a
standard PA-GE, presumably to obtain access to both PCI busses.
Of course "not working" is relative, route caching for vlan's sucks,
but at least it doesn't block chunks, dropping routes or packets,
the usual CEF diseases.
George
> From rs@seastrom.com Thu Nov 1 11:27:51 2001
> To: Alex Rubenstein <alex@nac.net>
> Cc: Francois Baligant <francois@be.wanadoo.com>,
> George Robbins <grr@shandakor.tharsis.com>,
> "cisco-nsp@puck.nether.net" <cisco-nsp@puck.nether.net>,
> "joe@monk.via.net" <joe@monk.via.net>
> Subject: Re: [nsp] Is PA-GE supported on 7500 ?
> From: rs@seastrom.com (Robert E. Seastrom)
> Date: 01 Nov 2001 11:27:46 -0500
> In-Reply-To: Alex Rubenstein's message of "Wed, 31 Oct 2001 23:49:59 -0500 (Eastern Standard Time)"
> Lines: 12
>
>
> Alex Rubenstein <alex@nac.net> writes:
>
> > I believe the differentiation is that a GEIP is a vip2-50, and a GEIP+ is
> > a vip4-80.
> >
> > we use a few GEIP+'s, they tend to work well at up to 500 mb/s or so.
>
> dot1q trunking is still broken on them though. :(
>
> ---Rob
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:21 EDT