Re: [nsp] odd interface problem

• Next message: George Robbins: "Re: [nsp] Is PA-GE supported on 7500 ?"
• Previous message: Robert E. Seastrom: "Re: [nsp] Is PA-GE supported on 7500 ?"
• Maybe in reply to: Phil Bedard: "[nsp] odd interface problem"
• Next in thread: Dmitri Kalintsev: "Re: [nsp] odd interface problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Well, you're only 9 bug-fix releases behind the times,
time to upgrade... We've got one in a 7513 running
12.0.16S and haven't see that, however we usually use
them in 7200's...

                                                Groege

> Date: Thu, 1 Nov 2001 10:00:44 -0600
> From: Phil Bedard <philb@cyberlynk.net>
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] odd interface problem
> Resent-Sender: cisco-nsp-request@puck.nether.net
>
> This is on a CT3 card on a 7513 running 12.0(10)S, for
> whatever reason doing a "show ip int brief" results in this:
>
> Serial1/0/0:15 10.10.10.10 YES NVRAM up up
> Serial1/0/0:16 10.10.10.10 YES NVRAM up up
> Serial1/0/0/-1:-1 unassigned YES manual down down
> Serial1/0/0:18 10.10.10.10 YES NVRAM up up
>
> You also can't do a specific show int of any of the serial interface on
> that CT3. IE: show int Serial1/0/0:18 gives an invalid input error. The
> other interfaces also can't be configured. Anyone seen this before?
>
> Thanks,
>
> Phil
>
>

• Next message: George Robbins: "Re: [nsp] Is PA-GE supported on 7500 ?"
• Previous message: Robert E. Seastrom: "Re: [nsp] Is PA-GE supported on 7500 ?"
• Maybe in reply to: Phil Bedard: "[nsp] odd interface problem"
• Next in thread: Dmitri Kalintsev: "Re: [nsp] odd interface problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:21 EDT