Re: [nsp] odd interface problem

From: Dmitri Kalintsev (dek@hades.uz)
Date: Thu Nov 01 2001 - 18:50:56 EST

Next message: George Robbins: "Re: [nsp] Is PA-GE supported on 7500 ?"
Previous message: Alex Rubenstein: "Re: [nsp] Is PA-GE supported on 7500 ?"
In reply to: Phil Bedard: "[nsp] odd interface problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Fix your config off-line and do copy tftp startup-config, followed by
reload. May help.

On Thu, Nov 01, 2001 at 10:00:44AM -0600, Phil Bedard wrote:
> This is on a CT3 card on a 7513 running 12.0(10)S, for
> whatever reason doing a "show ip int brief" results in this:
>
> Serial1/0/0:15 10.10.10.10 YES NVRAM up up
> Serial1/0/0:16 10.10.10.10 YES NVRAM up up
> Serial1/0/0/-1:-1 unassigned YES manual down down
> Serial1/0/0:18 10.10.10.10 YES NVRAM up up
>
> You also can't do a specific show int of any of the serial interface on
> that CT3. IE: show int Serial1/0/0:18 gives an invalid input error. The
> other interfaces also can't be configured. Anyone seen this before?
---end quoted text---

SY,

-- 
 CCNP, CCDP (R&S)                          Dmitri E. Kalintsev
 CDPlayer@irc               Network Architect @ connect.com.au
 dek @ connect.com.au    phone: +61 3 9674 3913 fax: 9251 3666
 http://-UNAVAIL-         UIN:7150410    cell: +61 414 821 382

Next message: George Robbins: "Re: [nsp] Is PA-GE supported on 7500 ?"
Previous message: Alex Rubenstein: "Re: [nsp] Is PA-GE supported on 7500 ?"
In reply to: Phil Bedard: "[nsp] odd interface problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:21 EDT