Perhaps this will help:
http://www.qorbit.net/documents/junos-radius-authentication.pdf
-- steve
-----Original Message-----
From: David McGaugh [mailto:david_mcgaugh@eli.net]
Sent: Monday, May 06, 2002 3:55 PM
To: juniper-nsp@puck.nether.net
Subject: Juniper RADIUS attributes
Hello All,
I'm working on setting up CiscoSecure ACS to authenticate our
Junipers
via RADIUS. I got the simple authentication working with the RADIUS-IETF
dictionary that comes with CiscoSecure. Now I'm trying to make use of
the Juniper vendor specific attributes i.e. Juniper-Local-User-Name,
Juniper-Allow-Commands, and Juniper-Deny-Commands however I am unsure
how to implement this with CiscoSecure. I have found the link:
http://www.juniper.net/techpubs/software/junos52/swconfig52-getting-star
ted/html/sys-mgmt-authentication2.html
where Juniper defines these with type and length values but have no idea
where I might throw them in at. I am far from a RADIUS expert (with the
exception of my current crash course). Any ideas or links to point me in
the right direction would be appreciated.
-Dave
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:35 EDT