Hello Przemek,
In JunOS 5.3, the old CoS cli/mode still exists. But if
you bootup your router with new CoS cli, the cosd will kick in,
and you will get error messages from "show chassis cos".
This command is removed from JunOS 5.4 and above..
Thanks,
- George
>
> All,
>
> How come this command is still available in JunOS 5.3?
> It is removed from documentation for 5.3, and I believe
> it is showing improper information about queue assignments:
> ...
> bits 000 output-queue 0;
> bits 001 output-queue 0;
> bits 010 output-queue 0;
> bits 011 output-queue 0;
> bits 100 output-queue 0;
> bits 101 output-queue 0;
> bits 110 output-queue 0;
> bits 111 output-queue 0;
> ...
>
> Thanks,
>
> Przemek
>
>
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:36 EDT