RE: [j-nsp] Viewing contents of LS-120 disk/PCMCIA flash card

• Next message: Vijay Gill: "Re: [j-nsp] [Re:] RE: [j-nsp] Does Juniper support CR-LDP ?"
• Previous message: Chang, Terence: "RE: SNMP Index Changes"
• In reply to: Richt Lee: "[j-nsp] Viewing contents of LS-120 disk/PCMCIA flash card"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Try this:
 
% dmesg | grep afd0
 
Should have something like this in your output:
afd0: 120MB <LS-120 VER5 00 UHD Floppy> [963/8/32] at ata0-slave using
PIO3
 
% mount /dev/rafd0 /mnt
 
-- steve
 
-----Original Message-----
From: Richt Lee [mailto:richtlee2000@yahoo.com]
Sent: Wednesday, July 10, 2002 2:59 AM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] Viewing contents of LS-120 disk/PCMCIA flash card
 
Hello,
Anyone knows how to mount the LS-120/PCMCIA Flash on a Juniper router to
view its content?
In previous version of JunOS 4.3 and earlier, we used to be able to
root@core% <mailto:root@core%25> mount /dev/rad3 /mnt
But this does not work from JunOS 5.x onwards. Anyone knows what is the
new command to do this? Seems like there is no documentation on this
anywhere.
 
 
 
  _____

Do You Yahoo!?
New! SBC Yahoo! Dial
<http://pa.yahoo.com/*http:/rd.yahoo.com/sbcyahoo/consumer/evt=640/*http
:/sbc.yahoo.com> - 1st Month Free & unlimited access

• Next message: Vijay Gill: "Re: [j-nsp] [Re:] RE: [j-nsp] Does Juniper support CR-LDP ?"
• Previous message: Chang, Terence: "RE: SNMP Index Changes"
• In reply to: Richt Lee: "[j-nsp] Viewing contents of LS-120 disk/PCMCIA flash card"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:36 EDT