Re: [j-nsp] FBF (Filter Based Forwarding) available on M5/M10?

• Next message: Greg Ketell: "Re: policy routing, ipv6 and 3rd party software"
• Previous message: Saku Ytti: "policy routing, ipv6 and 3rd party software"
• In reply to: Hank Nussbacher: "[j-nsp] FBF (Filter Based Forwarding) available on M5/M10?"
• Next in thread: Jeff Bartig: "Re: [j-nsp] FBF (Filter Based Forwarding) available on M5/M10?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Tue, Jun 12, 2001 at 11:22:46AM +0200, Hank Nussbacher:
> The wonderful FBF - http://www.juniper.net/techcenter/notes/552003.html is
> only supported on M20/M40/M160? Huh?!
>
> Well first we see from here that one needs an Internet Processor II ASIC to
> do FBF:
> http://www.juniper.net/products/105005.html
>
> Next, we see from:
> http://www.juniper.net/news/features/ipii/faq_ipii.html
> that the Internet Processor II ASIC is standard on M160 routers and as a
> simple control board upgrade on the M20 and M40 systems.
>
> Am I to deduce that the M5/M10 routers can't do FBF?
>
> -Hank

same asic and all 5/10 are IP II. probably a doc omission.

• Next message: Greg Ketell: "Re: policy routing, ipv6 and 3rd party software"
• Previous message: Saku Ytti: "policy routing, ipv6 and 3rd party software"
• In reply to: Hank Nussbacher: "[j-nsp] FBF (Filter Based Forwarding) available on M5/M10?"
• Next in thread: Jeff Bartig: "Re: [j-nsp] FBF (Filter Based Forwarding) available on M5/M10?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:36 EDT