[j-nsp] out the aux

From: Randy Bush (randy@psg.com)
Date: Wed Jun 13 2001 - 10:56:46 EDT


how can i configure the aux port so i can go OUT it? i.e. on a crisco, i
would

    line aux 0
     password <feen>
     no exec
     exec-timeout 120 0
     stopbits 1
     flowcontrol hardware
     transport input telnet
     transport preferred none
     speed 9600

and then, for luxury

    ip host line1 2001 <loopback address>

and then one can

    telnet line1

and go OUT the serial aux port

randy



This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:36 EDT