Re: [j-nsp] out the aux

• Next message: Bala Subrahmanyam Venkata: "RE: LSP config: CSPF and named path"
• Previous message: Bala Subrahmanyam Venkata: "LSP config: CSPF and named path"
• In reply to: Randy Bush: "[j-nsp] out the aux"
• Next in thread: Randy Bush: "Re: [j-nsp] out the aux"
• Reply: Randy Bush: "Re: [j-nsp] out the aux"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Wed, Jun 13, 2001 at 07:56:46AM -0700, Randy Bush:
> how can i configure the aux port so i can go OUT it? i.e. on a crisco, i
> would
>
> line aux 0
> password <feen>
> no exec
> exec-timeout 120 0
> stopbits 1
> flowcontrol hardware
> transport input telnet
> transport preferred none
> speed 9600
>
> and then, for luxury
>
> ip host line1 2001 <loopback address>
>
> and then one can
>
> telnet line1
>
> and go OUT the serial aux port
>
> randy

get tip from tip freebsd dist and configure /etc/remote.

• Next message: Bala Subrahmanyam Venkata: "RE: LSP config: CSPF and named path"
• Previous message: Bala Subrahmanyam Venkata: "LSP config: CSPF and named path"
• In reply to: Randy Bush: "[j-nsp] out the aux"
• Next in thread: Randy Bush: "Re: [j-nsp] out the aux"
• Reply: Randy Bush: "Re: [j-nsp] out the aux"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:36 EDT