Oops, missed a closing brace on the atm options!
#!/bin/ksh
i=32
echo "interfaces {"
echo " at-0/0/0 {"
echo " description ATM_INTERFACE;"
echo " encapsulation atm-pvc;"
echo " atm-options {"
echo " vpi 2 maximum-vcs 1024;"
echo " }"
while [ "$i" != "1025" ];
do
echo " unit $i {"
echo " encapsulation atm-snap;"
echo " vci 2.$i;"
echo " }"
let i=$i+1
done
echo " }"
echo "}"
> -----Original Message-----
> From: Martin, Christian [mailto:cmartin@gnilink.net]
> Sent: Saturday, September 01, 2001 11:32 AM
> To: 'Andrew Smith'; juniper-nsp@puck.nether.net
> Subject: RE: JunOS configuration tools
>
>
> The script that you'd have to create is about 4 lines long
> using ksh. In
> Perl, it could be even less.
>
> something like this should do it...
>
> #!/bin/ksh
>
> i=32
> echo "interfaces {"
> echo " at-0/0/0 {"
> echo " description ATM_INTERFACE;"
> echo " encapsulation atm-pvc;"
> echo " atm-options {"
> echo " vpi 2 maximum-vcs 1024;"
> while [ "$i" != "1025" ];
> do
> echo " unit $i {"
> echo " encapsulation atm-snap;"
> echo " vci 2.$i;"
> echo " }"
> let i=$i+1
> done
> echo " }"
> echo "}"
>
> ./chris
>
>
> > -----Original Message-----
> > From: Andrew Smith [mailto:as160@yahoo.com]
> > Sent: Saturday, September 01, 2001 3:52 AM
> > To: juniper-nsp@puck.nether.net
> > Subject: JunOS configuration tools
> >
> >
> > Hi, all
> >
> > Is there any tool that avaliable that can shave off
> > some manual config times. For example, when I want to
> > configure hundreds of sub-interfaces.
> >
> > Sorry, I am not good at scripting at all. 8-) That
> > is why I am seeking something with a bit less steeper
> > learning curve.
> >
> > TIA
> > ---andrew
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Get email alerts & NEW webcam video instant messaging with
> > Yahoo! Messenger
> > http://im.yahoo.com
> >
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT