Hi Preggie,
which encapsulation (PPP, Cisco-HDLC) do you have configured ?
We had a problem with a Cisco with auto-encapsulation on the X.21 interface.
regards
----------------------------------------------------------------
Carsten Strahler
Core Network Planning IP
Lambdanet Communications GmbH
Guenther-Wagner-Allee 13
D-30177 Hannover (Germany)
Phone +49 (0)511 / 84 88 - 12 86
Fax +49 (0)511 / 84 88 - 12 69
mailto:carsten.strahler@lambdanet.net
<mailto:carsten.strahler@lambdanet.net>
News & Facts finden Sie auf unserer Website: www.lambdanet.de
-----------------------------------------------------------
-----Ursprüngliche Nachricht-----
Von: Preggie Govender [mailto:pgovender@grintek.com]
Gesendet: Dienstag, 4. September 2001 10:17
An: juniper-nsp@puck.nether.net
Betreff: [j-nsp] E1 interoperability
Hi,
I've connected an M5 E1 G.703 (120 Ohm) interface to a G.703/X.21 converter
which is connected to a Cisco X.21 (high-density serial) interface. I'm
receiving an "Ino Framing errors, check FCS configuration" - I've changed
the configuration on the Juniper but to no avail - the Juniper is set-up for
unframed with internal clocking.
Please help !
Preggie
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT