Re: [j-nsp] E1 interoperability

From: Alfredo Sola (alfredo@intelideas.com)
Date: Tue Sep 04 2001 - 06:47:37 EDT

> I've connected an M5 E1 G.703 (120 Ohm) interface to a G.703/X.21
> converter which is connected to a Cisco X.21 (high-density serial)
> interface. I'm receiving an "Ino Framing errors, check FCS

        Hi, forgive me if this is pretty obvious, but are you using an X.21 DTE
cable? 

--
Alfredo Sola
Director técnico

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT