RE: [j-nsp] E1 interoperability

From: Preggie Govender (pgovender@grintek.com)
Date: Tue Sep 04 2001 - 08:58:02 EDT

Next message: Przemyslaw Karwasiecki: "[j-nsp] ATM ping to cisco devices"
Previous message: Preggie Govender: "RE: [j-nsp] AW: [j-nsp] E1 interoperability"
Maybe in reply to: Preggie Govender: "[j-nsp] E1 interoperability"
Next in thread: Przemyslaw Karwasiecki: "[j-nsp] ATM ping to cisco devices"
Reply: Przemyslaw Karwasiecki: "[j-nsp] ATM ping to cisco devices"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Yes

-----Original Message-----
From: Alfredo Sola [mailto:alfredo@intelideas.com]
Sent: 04 September 2001 12:48
To: Preggie Govender
Cc: juniper-nsp@puck.nether.net
Subject: Re: [j-nsp] E1 interoperability

> I've connected an M5 E1 G.703 (120 Ohm) interface to a G.703/X.21
> converter which is connected to a Cisco X.21 (high-density serial)
> interface. I'm receiving an "Ino Framing errors, check FCS

Hi, forgive me if this is pretty obvious, but are you using an X.21
DTE
cable?

--
Alfredo Sola
Director técnico

Next message: Przemyslaw Karwasiecki: "[j-nsp] ATM ping to cisco devices"
Previous message: Preggie Govender: "RE: [j-nsp] AW: [j-nsp] E1 interoperability"
Maybe in reply to: Preggie Govender: "[j-nsp] E1 interoperability"
Next in thread: Przemyslaw Karwasiecki: "[j-nsp] ATM ping to cisco devices"
Reply: Przemyslaw Karwasiecki: "[j-nsp] ATM ping to cisco devices"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT