hi,
We tested with S48i and it works, you need to tagged the VLAN because we need
to define a tag ID in Juniper config.
Not sure why Juniper need a tag id ?
We used 2 FE ports of S48i to Juniper.
Thanks,
keng-gee lau
----- Original Message -----
From: "Strahler, Carsten" <Carsten.Strahler@lambdanet.net>
To: "Juniper-Nsp (E-Mail)" <juniper-nsp@puck.nether.net>
Sent: Thursday, September 20, 2001 2:45 PM
Subject: Link aggregation on Gigabit-Ethernet
>
>
> Hi,
>
> I red recently that Junos 4.4 supports link aggregation (802.1ad)on
> Gigabit-Ethernet.
> Has anyone tried to use this together with an Extreme Summit 48i ?
>
>
> ----------------------------------------------------------------
> Carsten Strahler
>
> IP Planning
>
> Lambdanet Communications GmbH (AS 13237)
> Guenther-Wagner-Allee 13
> D-30177 Hannover (Germany)
>
> Phone +49 (0)511 / 84 88 - 12 86
> Fax +49 (0)511 / 84 88 - 12 59
> mailto:carsten.strahler@lambdanet.net
>
> web: www.lambdanet.net
> -----------------------------------------------------------
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT