[j-nsp] E3- compatibility between Juniper and Cisco

From: Strahler, Carsten (Carsten.Strahler@lambdanet.net)
Date: Mon Oct 08 2001 - 06:03:34 EDT

Next message: Gary Tate: "RE: [j-nsp] E3- compatibility between Juniper and Cisco"
Previous message: john heasley: "Re: [j-nsp] Clock drift and rancid annoyance"
Next in thread: Gary Tate: "RE: [j-nsp] E3- compatibility between Juniper and Cisco"
Maybe reply: Gary Tate: "RE: [j-nsp] E3- compatibility between Juniper and Cisco"
Maybe reply: Gary Tate: "RE: [j-nsp] E3- compatibility between Juniper and Cisco"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

we've some trouble to connect a Cisco to our Juniper via E3-HDLC. There are
a lot of bit-failures on the link, but the line is o.k..
Has anyone done this before and was faced with this problem ?

----------------------------------------------------------------
Carsten Strahler

IP Planning

Lambdanet Communications GmbH (AS 13237)
Guenther-Wagner-Allee 13
D-30177 Hannover (Germany)

Phone +49 (0)511 / 84 88 - 12 86
Fax +49 (0)511 / 84 88 - 12 59
mailto:carsten.strahler@lambdanet.net

web: www.lambdanet.net
-----------------------------------------------------------

Next message: Gary Tate: "RE: [j-nsp] E3- compatibility between Juniper and Cisco"
Previous message: john heasley: "Re: [j-nsp] Clock drift and rancid annoyance"
Next in thread: Gary Tate: "RE: [j-nsp] E3- compatibility between Juniper and Cisco"
Maybe reply: Gary Tate: "RE: [j-nsp] E3- compatibility between Juniper and Cisco"
Maybe reply: Gary Tate: "RE: [j-nsp] E3- compatibility between Juniper and Cisco"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT