RE: [j-nsp] E3- compatibility between Juniper and Cisco

• Next message: Stephen Gill: "Re: [j-nsp] R: [j-nsp] class permission problem"
• Previous message: Gary Tate: "RE: [j-nsp] E3- compatibility between Juniper and Cisco"
• Maybe in reply to: Strahler, Carsten: "[j-nsp] E3- compatibility between Juniper and Cisco"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hi Alex,

No Cisco HDLC is fine on all TDM interfaces. It's just that we use PPP
by default and not Cisco HDLC.

Gary

>-----Original Message-----
>From: Alessandro Chiolo [mailto:alessandro.chiolo@it.easynet.net]
>Sent: 08 October 2001 12:42
>To: Gary Tate; Juniper-Nsp
>Subject: Re: [j-nsp] E3- compatibility between Juniper and Cisco
>
>
>> >we've some trouble to connect a Cisco to our Juniper via
>> >E3-HDLC. There are
>
>> This is a live configuration in the LAB here
>> Cisco Configuration:
>> encapsulation ppp
>
>i dont' see any cisco hdlc in your lab config....
>does this implictly mean that "encapsulation cisco-hdlc" is
>broken on E3? I
>successfully use it on an E1....
>
>regards,
>Alex
>
>
>

• Next message: Stephen Gill: "Re: [j-nsp] R: [j-nsp] class permission problem"
• Previous message: Gary Tate: "RE: [j-nsp] E3- compatibility between Juniper and Cisco"
• Maybe in reply to: Strahler, Carsten: "[j-nsp] E3- compatibility between Juniper and Cisco"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT