Re: show label database for L3 VPN

From: Richard Salaiz (rsalaiz@juniper.net)
Date: Tue Oct 30 2001 - 12:52:36 EST

Next message: wayne@n3si.com: "[j-nsp] tac+"
Previous message: Tom Thomas: "RE: SNMP Sets"
Maybe in reply to: Strahler, Carsten: "show label database for L3 VPN"
Next in thread: Javier Antich: "RE: show label database for L3 VPN"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi Carsten --

Try "show route table mpls".

-rich

At 09:01 AM 10/30/2001, Strahler, Carsten wrote:
>Hi,
>
>we're currently implementing a L3-VPN. On the Egress-PE I'm looking for
>a
>command to see an output where an incoming inner label and the assigned
>outgoing interface is listed.
>Any ideas ?
>
>
>----------------------------------------------------------------
>Carsten Strahler
>
>IP Planning
>
>Lambdanet Communications GmbH (AS 13237)
>Guenther-Wagner-Allee 13
>D-30177 Hannover (Germany)
>
>Phone +49 (0)511 / 84 88 - 12 86
>Fax +49 (0)511 / 84 88 - 12 59
>mailto:carsten.strahler@lambdanet.net
>
>web: www.lambdanet.net
>-----------------------------------------------------------

Next message: wayne@n3si.com: "[j-nsp] tac+"
Previous message: Tom Thomas: "RE: SNMP Sets"
Maybe in reply to: Strahler, Carsten: "show label database for L3 VPN"
Next in thread: Javier Antich: "RE: show label database for L3 VPN"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:37 EDT