Juniper / Extreme 802.3ad

From: Nicolas Fevrier (nicolas.fevrier@telindus.fr)
Date: Tue Nov 20 2001 - 03:57:24 EST

Hi people,
some of you asked me the test report concerning a connection
between a Juniper and an Extreme switch with aggregated ethernet.
No particular test have been performed yet but here is the config
we had on the Summit 48i (version 6.2), it's quite simple :

Hope this helps,

Nicolas. 

---
Sh conf

# Summit48i Configuration generated Mon Nov 19 14:22:19 2001
# Software Version 6.2.0 (Build 60)   By Release_Master on 09/21/01 20:53:17
create vlan "test"
# Route Map Configuration.
# Config information for VLAN Default.
config vlan "Default" tag 1     # VLAN-ID=0x1  Global Tag 1
config stpd s0 add vlan "Default"
# Config information for VLAN test.
config vlan "test" tag 100     # VLAN-ID=0x64  Global Tag 3
config vlan "test" protocol "IP"
config vlan "test" ipaddress 10.1.1.2 255.255.255.0 
config vlan "test" add port 1 tagged
# Boot information
use image secondary
# Syslog configuration
# SNMP Configuration
# Protocol definitions
# Spanning tree information 
# GVRP configuration
# MAC FDB configuration and static entries
# -- IP Interface[0] = "Default"
# -- IP Interface[1] = "test"
# Global IP settings.
# IP ARP Configuration
enable iparp checking
enable iparp refresh
# IP Route Configuration
enable sharing 1 grouping 1-3 algorithm address-based
# Multicast configuration
# RIP interface configuration 
# RIP global parameter configuration 
# DVMRP Router Configuration
# PIM Router Configuration
# Ospf Area Configuration
# Ospf Range Configuration
# Interface Configuration
# Virtual Link Configuration
# Ospf ASE Summary Configuration
# OSPF Router Configuration
# ESRP Interface Configuration
config vlan "test" esrp esrp-election ports-track-priority-mac
# IPX routing configuration
# IPX static routes
# IPX static services
# SLB Configuration
# VRRP Configuration
# EAPS configuration
# NAT configuration
# SNTP client configuration
# BGP Router Configuration
# BGP Peer Group Configuration
# BGP Neighbor Configuration
# Mac Vlan Configurations
# NetFlow Filter Specifications Config
# NetFlow Enable/Disable per port
# NetFlow Servers Config
# NetFlow TimeOut Config
# NetFlow Filters Enable/Disable
disable flowstats
# NetFlow Ping Check Config
# System-wide Debug Configuration 
#No System-wide debug tracing configured
#Vlan Based Debug Configuration
#No Vlan-based debug-tracing configured
#Port Based Debug Configuration
#No Port based debug-tracing configured
# Network Login Configuration
# End of configuration file for "Summit48i".

.

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT