Junos 5.1 marking the dscp bits

• Next message: nicolas.fevrier@free.fr: "Re: [j-nsp] Tool to go from Cisco config to Junper config"
• Previous message: Rich Salaiz: "Re: [j-nsp] 2547bis dual-homed CE"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

I would like to mark ip traffic entering an interface
(so-2/2/0) without tos/dcsp set and leaving interface
(ge-2/1/0) with DSCP bits set to AF1 .(example)
Traffic coming from an other incomming interface
(so-2/2/1) and going to the same outgoing interface
(ge-2/1/0) should get other DSCP bits.( AF2 or EF for
example ).
I use 5.1 with internetII processor.

I am only interested in the marking of the packets so
the next router can do the mapping based on the
incoming dscp.

Somebody has the correct config for this ?

Thanks
Bert

________________________________________________________________
Nokia 5510 looks weird sounds great.
Go to http://uk.promotions.yahoo.com/nokia/ discover and win it!
The competition ends 16 th of December 2001.

• Next message: nicolas.fevrier@free.fr: "Re: [j-nsp] Tool to go from Cisco config to Junper config"
• Previous message: Rich Salaiz: "Re: [j-nsp] 2547bis dual-homed CE"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT