xw,
I believe it is a typo in the Doc. cannot run that command.
# set protocols isis passive
^
syntax error.
[edit]
-dave
-----Original Message-----
From: xw [mailto:xiaowu23@yahoo.com]
Sent: Tuesday, January 08, 2002 4:51 PM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] ISIS - "passive"
I came across the following config when I was looking at an ISIS
routing instance in 5.1 Online Manual.
protocols {
isis {
rib-group common;
export filter-on-voice-policy;
interface so-2/2/2.0;
interface so-4/2/2.0;
passive;
}
}
My question is, why would we want to put "passive" here? If
"interface so-2/2/2.0 passive" I understand what we are supposed
to get but with the above configuration, are we telling the
router to set both interface as passive or for other purposes???
Any help will be very much appreciated.
XW
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT