On Wed, Jan 09, 2002 at 11:36:47AM -0000, Luis Garrido wrote:
>
> Hello,
>
> We have a juniper M10 and the management is in-band, As we donīt have any
> equipment connected to the ethernet port mgmt of the juniper we have a
> critical alarm in the leds of the craft terminal. We donīt want this alarm
> since if another critical alarm appears we will not note that with the leds
> in the craft terminal.
set interface fxp0 disable
commit
Or put a RJ45 plug in there where you loop pin 1 to pin 3 and
pin 2 to pin 6, then the port will have link.
/Jesper
-- Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456 Work: Network manager @ AS3292 (Tele Danmark DataNetworks) Private: FreeBSD committer @ AS2109 (A much smaller network ;-)One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them.
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:38 EDT