Tony,
I've forwarded your comment to bug-doc so that the appropriate writer
can pick it up for the manuals.
Thanks,
..Aviva
--------------------------------
Aviva Garrett
Director, Technical Publications
Juniper Networks, Inc.
(408) 745-2077
In message <Pine.BSI.4.44.0201301026450.21159-100000@malasada.lava.net>you writ
e:
> On Wed, 30 Jan 2002, Julian Eccli wrote:
>
> > You didn't put the route in the inet.2 table.
> >
> > *** As of 5.1 you can do it this way:
> >
> > Under routing-options, make sure you have a rib group to import routes
> > into both inet.0 and inet.2.
> >
> > rib-groups {
> > stat-rg {
> > import-rib [ inet.0 inet.2 ];
> > }
> >
> > Under routing-options static, apply the rib-group.
> >
> > static {
> > rib-group stat-rg;
> >
> >
> > *** Pre 5.1 it's done this way:
>
> Would be nice if this was all documented in the manuals. The multicast
> sections of the manual have a lot of multicast configuration info for IGPs
> but are sparse on MBGP configuration info. As it stands without the above
> info, I think a reasonable person might expect a 'family inet any' clause
> to do the right thing but apparently that's not enough and this fact isn't
> well documented.
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:39 EDT