Hi
Within the context of a MPLS VPN on Juniper, I'm trying to set the "ping
mib" to ping from a PE to either another PE (egress side) or CE (ingress
side).
From within that first PE I can execute 'ping routing-instance raj_hub
192.178.50.17' where raj_hub is obviously my routing instance and
192.178.50.17 is the ip on the ingress side of the CE. This appears to work.
So to effectively achieve the same using the ping mib I'm trying to set
* pingCtlTargetAddress to 192.178.50.17 (0xc0 0xB2 0x32 0x11)
* pingCtlAdminStatus to enabled(1)
* pingCtlRowStatus to createAndGo(4)
and using juniper ping mib setting
* jnxPingCtlRoutingInstanceName to raj_hub (0xA2 0x8D 0x98 0x37 0x25
0x96 0xA5 0x8E)
Does anyone know if this should work?
When I set 'jnxPingCtlRoutingInstanceName' to raj_hub, it seems to not like
this. Can someone advise me on what the syntax is suppose to be. I just
converted it to the ascii equivalent as (0xA2 0x8D 0x98 0x37 0x25 0x96 0xA5
0x8E), but I keep getting inconsistent value when I try to set the variable.
raj
Raj Arora
arorar@nortelnetworks.com
Nortel Networks
(esn) 393-2916, (613) 763-2916
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:39 EDT