I did the regular 'ping' on CE, and 'ping vpn-interface' on PE, neither can
make it. I debug the icmp on IOS when initiating a ping, seemed no response
from Juniper's vrf port.
>From: Andrea Reitzel <andrea.reitzel@wcom.com>
>To: David Liang <junosguy@hotmail.com>
>Subject: RE: [j-nsp] VRF interface ping problem
>Date: Wed, 06 Feb 2002 16:13:26 -0500
>
>Did you do a regular ping or the ping vpn-interface?
>
>If you tried the regular ping then try the following syntax:
>ping vpn-interface <interface-name> <ip address>
>
>-----
>Andrea Reitzel
>Worldcom/vBNS Engineering
>703-886-1809
>areitzel@mci.net
>
> > -----Original Message-----
> > From: David Liang [mailto:junosguy@hotmail.com]
> > Sent: Wednesday, February 06, 2002 2:50 PM
> > To: juniper-nsp@puck.nether.net
> > Subject: [j-nsp] VRF interface ping problem
> >
> >
> > Hi, All
> >
> > A simple quesition about VPN PE-CE connection, the Topology like that:
> >
> > sonet/cisco-hdlc or PPP
> > Junos-----------------------------IOS
> > vpn/PE CE
> >
> > I'm sure the ports are pingable at first, but after adding the
> > sonet port to
> > junos VRF, the ping from CE will be failed. From the IOS side, it
> > seems It
> > can't find the juniper port's ARP at all. So is there additional
> > configuration for both sides?
> >
> > Thanks! -David
> >
> > _________________________________________________________________
> > Send and receive Hotmail on your mobile device: http://mobile.msn.com
> >
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:39 EDT