Hi David,
the correct command should be " ping vpn-interface so-0/2/2 10.0.0.2 local
10.0.0.1"
Carsten Strahler
Lambdanet Communications
> -----Ursprungliche Nachricht-----
> Von: David Liang [mailto:junosguy@hotmail.com]
> Gesendet: Donnerstag, 7. Februar 2002 08:50
> An: josefb@juniper.net
> Cc: juniper-nsp@puck.nether.net
> Betreff: Re: [j-nsp] VRF interface ping problem
>
>
> Hi, Josef
>
> Thanks for your response, here is some info:
>
> sonet/cisco-hdlc or PPP
> subnet: 10.0.0.0/30
> Junos--------------------------------------IOS
> vpn/PE (so-0/2/2) CE
>
> Version: Junos5.1.R1.4
>
> [edit routing-instances VPN-RED]
> instance-type vrf;
> interface so-0/2/2.0;
> route-distinguisher 1000:100;
> vrf-import VPN-RED-import;
> vrf-export VPN-RED-export;
> protocols {
> bgp {...}
>
> Junos# run show route table VPN-RED.inet.0
>
> VPN-1.inet.0: 2 destinations, 2 routes (2 active, 0 holddown,
> 0 hidden)
> + = Active Route, - = Last Active, * = Both
>
> 10.0.0.0/30 *[Direct/0] 00:05:39
> > via so-0/2/2.0
> 10.0.0.1/32 *[Local/0] 00:10:07
> Local via so-0/2/2.0
>
> Junos# run ping vpn-interface so-0/2/2 10.0.0.2
> PING 10.0.0.2(10.0.0.2): 56 data bytes
> -------Nothing shown up.
>
> After delete So-0/2/2 from VRF
>
> Junos# run show route 10.0.0.0
>
> inet.0: 14 destinations, 14 routes (14 active, 0 holddown, 0 hidden)
> + = Active Route, - = Last Active, * = Both
>
> 10.0.0.0/30 *[Direct/0] 00:00:13
> > via so-0/2/2.0
>
> lab@POP2-M20# run ping 10.0.0.2
> 64 bytes from 10.0.0.2: icmp_seq=0 ttl=255 time=0.651 ms
>
> It works!
>
> Hoping it's clueful for you. Thanks! -David
>
> >From: Josef Buchsteiner <josefb@juniper.net>
> >To: "David Liang" <junosguy@hotmail.com>,juniper-nsp@puck.nether.net
> >Subject: Re: [j-nsp] VRF interface ping problem
> >Date: Thu, 07 Feb 2002 06:43:14 +0100
> >
> >David,
> >
> >What version are you running and can you send me the
> >complete configuration including the 'show route
> >table xxx.inet.0 detail' and the address you performed
> >the ping to
> >
> >thanks
> >Josef
> >
> >
> >At 08:49 PM 2/6/2002, David Liang wrote:
> >>Hi, All
> >>
> >>A simple quesition about VPN PE-CE connection, the Topology
> like that:
> >>
> >> sonet/cisco-hdlc or PPP
> >> Junos-----------------------------IOS
> >> vpn/PE CE
> >>
> >>I'm sure the ports are pingable at first, but after adding
> the sonet port
> >>to junos VRF, the ping from CE will be failed. From the IOS
> side, it seems
> >>It can't find the juniper port's ARP at all. So is there additional
> >>configuration for both sides?
> >>
> >>Thanks! -David
> >>
> >>_________________________________________________________________
> >>Send and receive Hotmail on your mobile device:
http://mobile.msn.com
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:39 EDT