Re: AW: [j-nsp] VRF interface ping problem

From: Josef Buchsteiner (josefb@juniper.net)
Date: Fri Feb 08 2002 - 10:31:06 EST

Next message: JunoGuy : "[j-nsp] Question on generated route"
Previous message: Matias Lambert (CEA): "RE: LSP's for IGP versus iBGP"
In reply to: Strahler, Carsten: "[j-nsp] AW: [j-nsp] VRF interface ping problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

At 04:02 PM 2/7/2002, Strahler, Carsten wrote:
>Hi David,
>
>the correct command should be " ping vpn-interface so-0/2/2 10.0.0.2 local
>10.0.0.1"

The local statement is only needed if you have configured
the default-address-selection under the system stanza. If this
is not configured, there is no need to specify the local
ip-address statement.

regards
Josef

Next message: JunoGuy : "[j-nsp] Question on generated route"
Previous message: Matias Lambert (CEA): "RE: LSP's for IGP versus iBGP"
In reply to: Strahler, Carsten: "[j-nsp] AW: [j-nsp] VRF interface ping problem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:39 EDT