Jack,
According with my JTAC Engineer, console is the only port active by
default.
Is AUX active by default after 5.1 ?
German
On Mon, 11 Mar 2002, Jack Maxfield wrote:
> Peter,
>
> There are some required config settings to enable the AUX port...
>
> Try:
>
> [edit]
> lab@routerA# set system ports auxiliary type vt100
>
> Regards, Jack
>
> > -----Original Message-----
> > From: ProServe - Peter Batenburg [mailto:peter@proserve.nl]
> > Sent: Monday, March 11, 2002 6:08 AM
> > To: juniper-nsp@puck.nether.net
> > Subject: Juniper M10 with modem management
> >
> >
> > Hi,
> >
> > I connected a external modem to the AUX/MODEM port on our M10. Only
> > problem is that the modem doesn't see an connection with the
> > router (TR
> > led). Are there any config options that need to be changed to
> > make this
> > port active? Or should it work instantly? We're running on
> > JunOS 5.1R1.4.
> > Thanks.
> >
> > Met vriendelijke groet/With kind regards,
> >
> > Peter Batenburg
> >
> > ProServe B.V.
> >
> >
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:39 EDT