Hi,
I have few questions on DiffServ Based QoS configuration on Juniper
routers,
In Juniper's "Class of Service" document i could not find commands
to classify the IP traffics, there are commands to give actions(like,
RED, rate limiting, policer etc...).
Whereas Cisco QOS CLI provides commands for IP traffic
classification (conditions, like src/dest IP address, port number,
TOS/DSCP values) and actions (RED, rate limiting, policer,
bandwitdth etc...)on an interface.
The Juniper's "Policy Framework" document provides commands for conditions
(classifying) and actions for firewall filter(IPSec) configuration.
I think it does not classifying IP traffic for non-IPSec configurations(to
configure
bandwitdth, priority , policing etc in interface mode as done by Cisco QoS
CLI ).
In Cisco QoS CLI it is possible to configure conditions(classification) and
actions for
a router using the class-map and policy-map commands and this policies
can be serviced for a particular interface within a Cisco router.
Is similar thing possible in Juniper router? An example would help.
Please let me know.
Regards,
Arun
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:40 EDT