Hi! Juniper folks.
This is knight .
I have a question about pfe hardware filter .
I have applied some filter at our juniper router interfaces and check a
filter log.
When i check a filter log , i see a pfe as follow.
Time Filter A Interface Pro Source address Destination
address
13:24:41 pfe R fe-3/2/0.0 ICM xxx.xxx.183.54 xxx.xxx.32.69:744
13:08:16 pfe R t3-0/3/1.0 TCP xxx.xxx.211.19
xxx.xxx.183.59:12345
13:08:13 pfe R t3-0/3/1.0 TCP xxx.xxx.211.19
xxx.xxx.183.59:12345
13:08:01 pfe R t3-0/3/1.0 TCP xxx.xxx.211.19
xxx.xxx.183.56:12345
13:07:58 pfe R t3-0/3/1.0 TCP xxx.xxx.211.19
xxx.xxx.183.56:12345
12:50:42 pfe R t3-0/3/1.0 TCP xxx.xxx.235.210
xxx.xxx.183.59:12345
12:50:39 pfe R t3-0/3/1.0 TCP xxx.xxx.235.210
xxx.xxx.183.59:12345
I have heard that pfe means pfe hardware filter , but i can't find
any info about it in juniper homepage.
Would you let me know how does pfe hardware filter act ?
Any comments will be appreciated .
Regards,
/Jongwon Kim e-mail:knight@npix.net
Network Manager Office:+82-2-571-0611
IBR, Inc. Mobile:+82-16-332-5902
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:40 EDT