I have asked about this myself, and it is currently not possible. Perhaps
we can put all our names together to help get this pushed through.
Thanks,
Tony
On 3/3/01 8:14 AM, "Benny Chee" <bennyc@magix.com.sg> wrote:
> Hi,
>
> I would like to poll for InOctets/OutOctets on each individual PVCs
> created with multipoint-destination on my ATM interfaces via SNMP just like
> what i did on my CISCO boxes using the following mibs,
> ftp://ftp.cisco.com/pub/mibs/v2/CISCO-AAL5-MIB.my. Does juniper have the same
> thing as what CISCO boxes have? This is essential for billing purposes.
>
> Benny
>
> Below is a snippet of my config:
>
> interfaces {
> at-0/2/0 {
> mtu 9180;
> encapsulation atm-pvc;
> atm-options {
> vpi 0 maximum-vcs 1200;
> }
> unit 0 {
> encapsulation atm-snap;
> multipoint;
> family inet {
> address 192.168.14.1/24 {
> multipoint-destination 192.168.14.2 {
> vci 0.65;
> shaping {
> vbr peak 4500000 sustained 3500000 burst 64;
> }
> inverse-arp;
> }
> multipoint-destination 192.168.14.3 {
> vci 0.66;
> shaping {
> vbr peak 4500000 sustained 3500000 burst 64;
> }
> inverse-arp;
> }
> }
> }
> }
> }
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:40 EDT