I note that in the 4.3 manuals on page 163 the following is stated about
Frame relay:
"Users contract with their providers for a specific minimum portion of the
shared bandwidth Committed Information Rate (CIR) and for a maximum
allowable peak rate, Burst Information Rate (BIR). Depending on the terms of
the contract, traffic exceeding the CIR can be marked as eligible for
discard, in the event of network congestion, or a best effort term can apply
up to the BIR rate."
Yet I cannot find any instruction to configure these values for Frame Relay.
Are these values currently supported in JunOs ?
Rich
-- This communication contains confidential information intended solely for the use of the individual/s and/or entity or entities to whom it was intended to be addressed. If you are not the intended recipient, be aware that any disclosure, copying, distribution, or use of the contents of this transmission is prohibited. If you have received this communication in error, please contact the sender immediately, delete this communication from your system, and do not disclose its contents to any third party, or use its contents. Any opinions expressed are solely those of the author and do not necessarily represent those of Orchestream Ltd or its group of companies unless otherwise specifically stated.
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:40 EDT