Re: Juniper Config for Peering-points

From: Arnd Vehling (av@nethead.de)
Date: Thu Mar 22 2001 - 04:14:46 EST

Next message: Bauer Kurt: "[j-nsp] AW: Juniper Config for Peering-points"
Previous message: LMF: "RE: Multicast configuration on fully meshed atm network"
In reply to: Bauer Kurt: "Juniper Config for Peering-points"
Next in thread: nicholas harteau: "Re: Juniper Config for Peering-points"
Reply: nicholas harteau: "Re: Juniper Config for Peering-points"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

Bauer Kurt wrote:
> is there an easy way to configure a lot of different peers with different
> ASes on a Juniper (JunOS 4.3), other than to make a bgp-group for every peer
> ?? Maybe one group for all peers or something similar ??

You can make one group for all peers, sure.

> I just couldn't find anything regarding this problem in the manual.

It sure is in the manual.

regards,

Arnd

-- 
NetHead                                 Network Design and Security
Arnd Vehling                            av@nethead.De
Gummersbacherstr. 27                    Phone: +49 221 8809210
50679 Köln                              Fax  : +49 221 8809212

Next message: Bauer Kurt: "[j-nsp] AW: Juniper Config for Peering-points"
Previous message: LMF: "RE: Multicast configuration on fully meshed atm network"
In reply to: Bauer Kurt: "Juniper Config for Peering-points"
Next in thread: nicholas harteau: "Re: Juniper Config for Peering-points"
Reply: nicholas harteau: "Re: Juniper Config for Peering-points"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:41 EDT