Kurt,
What version of code are you running? It can't be done with 4.3R2, you get the error
humphrey@testrouter# commit and-quit
[edit protocols bgp]
external peer group test's AS number must be configured
error: configuration check-out failed
[edit protocols bgp group test]
humphrey@testrouter#
Where the group test looks thus:
type external;
neighbor 195.66.224.88 {
peer-as 8582;
}
neighbor 195.66.224.82 {
peer-as 4513;
}
I suspect that this may be a feature which is coming. Everyone I speak to about this
finds it a little frustrating.
Depending on how you do your policies you can minimize the content of each group to just
a neighbor address, a description and a peer as.
Dave Humphrey
-----Original Message-----
From: Bauer Kurt [mailto:KBauer@ait.at]
Sent: 22 March 2001 09:15
To: Juniper-Nsp (E-Mail)
Subject: [j-nsp] AW: Juniper Config for Peering-points
But as it seems to me, i can only configure one peer-as per group, but every
peer has a different AS. How do I do that ??
regards,
Kurt
> -----Ursprüngliche Nachricht-----
> Von: Arnd Vehling [mailto:av@nethead.de]
> Gesendet: Donnerstag, 22. März 2001 10:15
> An: Bauer Kurt
> Cc: Juniper-Nsp (E-Mail)
> Betreff: Re: Juniper Config for Peering-points
>
>
> Hi,
>
> Bauer Kurt wrote:
> > is there an easy way to configure a lot of different peers
> with different
> > ASes on a Juniper (JunOS 4.3), other than to make a
> bgp-group for every peer
> > ?? Maybe one group for all peers or something similar ??
>
> You can make one group for all peers, sure.
>
> > I just couldn't find anything regarding this problem in the manual.
>
> It sure is in the manual.
>
> regards,
>
> Arnd
> --
> NetHead Network Design and Security
> Arnd Vehling av@nethead.De
> Gummersbacherstr. 27 Phone: +49 221 8809210
> 50679 Köln Fax : +49 221 8809212
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:41 EDT