Re: mixing 802.1q and 802.3 or type II interfaces

• Next message: Adagio Vangogh: "Re: mixing 802.1q and 802.3 or type II interfaces"
• Previous message: Sykes, Phil: "Re: Juniper courses?"
• In reply to: Adagio Vangogh: "mixing 802.1q and 802.3 or type II interfaces"
• Next in thread: Adagio Vangogh: "Re: mixing 802.1q and 802.3 or type II interfaces"
• Reply: Adagio Vangogh: "Re: mixing 802.1q and 802.3 or type II interfaces"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hi Adagio,

Yes you can have multiple logical interfaces on the same ethernet interface
be they tagged or not, see:

http://www.juniper.net/techpubs/software/junos44/swconfig44-interfaces/html/interfaces-ethernet-config10.html#1013155

If you are using VLAN + CCC then you are limited with the VLAN ID's see:

http://www.juniper.net/techpubs/software/junos44/swconfig44-interfaces/html/interfaces-ethernet-config11.html

Rob Heath

At 01:17 28/04/2001 -0400, Adagio Vangogh wrote:
>Does JUNOS allow creating a logical interface with vlan id 20,
>and a another logical interface to process ethernet type II frames
>off of the same physical interface?

• Next message: Adagio Vangogh: "Re: mixing 802.1q and 802.3 or type II interfaces"
• Previous message: Sykes, Phil: "Re: Juniper courses?"
• In reply to: Adagio Vangogh: "mixing 802.1q and 802.3 or type II interfaces"
• Next in thread: Adagio Vangogh: "Re: mixing 802.1q and 802.3 or type II interfaces"
• Reply: Adagio Vangogh: "Re: mixing 802.1q and 802.3 or type II interfaces"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:42 EDT