I've seen this too - I sust set the metric to zero on the loopback.
chris
> -----Original Message-----
> From: Jay Burns [mailto:jayburns66@hotmail.com]
> Sent: Wednesday, May 23, 2001 9:25 PM
> To: juniper-nsp@puck.nether.net
> Subject: [j-nsp] ISIS metric question
>
>
> I notice if I use a Juniper for a given network node and
> configure the net
> address for an ISIS instance on the loopback, a metric 10 is
> added to path
> costs above that if I used a Cisco for the same node. Why
> would you want to
> add a cost to the loopback as if the router resides off the loopback?
>
> -Jay
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:42 EDT